Green
tire inner painting machine The automatic spraying machine for spraying of green tires is used for application of emulsions onto the inner surfaces of green tires. ¡@ 
¡@ | Model | PHT - 375 | PHT - 376 | PHT - 377 | PHT - 378 | Tire size | I/D, ATV | M/C | I/D, ATV, M/C | I/D, ATV, L/T | Type | Vertical | Horizontal | Motor (AC) | 1 HP | 2 HP | Material tank | 1 unit | Air pressure | 3.5 - 7 kg / cm |
|
B/C
green tire pre-forming machine 
|
¡@
¡@ Model | PHT - 012 | | Tire size | 12, 14, 16, 18, 20, 22, 24, 26, 27~ 28¡¨ | Air pressure | 1.5 ~ 4.5 kg / cm |
|
Green
tire venting machine After a green tire has been built, air pockets will be between each ply of nylon cord and the tread. The air needs to be vented by this machine when the tire is vulcanized in the vulcanizer. This process will prevent air bubbles from appearing on finished tire. |
¡@ | 
| ¡@ ¡@ ¡@ Model | PHT - 260 | Tire size | M/C, S/C, I/D | Motor | AC 2 HP | Speed | 260 times / min | Venting pitch | 25 mm |
|
Tread
joint pressing machine | After green tire has been built the splicing strength of tread joint will be low. The joint should be pressed by this machine to re-inforce the strength of the tire. |
¡@ 
| ¡@
¡@
¡@ ¡@ Model | PHT - 850 | Motor | AC 1/2 HP | Air pressure | 7 kg / cm |
|
|
