Curing sticker for
rubber 
¡@ | This sticker is applied on green tires, tubes and all kind of rubber products. After curing with mold, the label will fully adhered to the surface of rubber and the logo image will not be distorted or blurred. By applying sticker the molds can be adjusted for multiple size of rubber which will reduce the mold cost significantly. |
¡@
PU prepolymer for
elastomer 
| 
| These high-performance Urethane elastomer systems are easy to handle. They come in a wide variety of shore hardness and are economical to use in the making of complex geometrically moulded parts in conjunction with a wide range of other materials. |
|
Item
|
PHT - 5060
|
PHT - 5090 |
PHT - 5096 |
|
Content
|
2.3 ¡Ó 0.1
|
4.3 ¡Ó 0.1 |
5.8 ¡Ó 0.1 |
|
Viscosity (CPS/40 ¢XC)
|
1500 - 4000
|
7000 - 17000 |
4500 - 12500 |
|
PHR of MOCA
|
7
|
12.5 |
16.6 |
|
Pot-Life ( Min )
|
30
|
10 |
5 |
|
Hardness ( Shore ) A :
|
54 - 60
|
86 - 92 |
90 - 96 |
|
Elongation %
|
450 - 500
|
500 - 600 |
350 - 450 |
|
Tensile ( Kg / cm )
|
20 - 60
|
200 - 300 |
200 - 350 |
|
Type
|
PPG |
|
Applications
|
Industry products, etc.
|
Mechanical
parts, roll, etc. |
Heavy load rollers, deflection pulleys, etc. |
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
|
Item
|
PHT - 5100
|
PHT - 5167 |
PHT - 5160 |
|
Content
|
4.4 ¡Ó 0.1
|
6.3 ¡Ó 0.1 |
¡@ |
|
OH
|
¡@
|
¡@ |
59 ¡Ó 3 |
|
Viscosity (CPS/40 ¢XC)
|
5000 - 11000
|
2500 - 7500 |
3500 - 8500 |
|
T-80
|
¡@
|
¡@ |
8.5 |
|
PHR of MOCA
|
12.5
|
18.2 |
¡@ |
|
Pot-Life ( Min )
|
11
|
6 |
¡@ |
|
Hardness ( Shore ) A :
|
86 - 92
|
89 - 98 |
28 |
|
Elongation %
|
00 - 500 |
350 - 450 |
500 |
|
Tensile ( Kg / cm)
|
300 - 450
|
350 - 500 |
11 |
|
Type
|
PTMG
|
Polyester |
|
Applications
|
Adiprene
L - 100
|
Adiprene
L - 167 |
Solvent & chemical resistance
for printing roll, etc. |
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
|
¡@
¡@
Moca
Moca is used as PU (Polyurethane resin) curing agent. The chlorine atoms on benzene ring can slow down the activity of ¡§NH ¡¨ group, so as to extend the pot life while casting. ¡@ |
|
¡@
|
|
Item |
PHT - 15 |
|
Appearance |
Light yellow crystalline pill |
|
Odor |
Amine odor |
|
Boiling point |
202 ~ 214 ¢XC (3mmHg) |
|
Melting point |
98¢XC min. |
|
Vapor pressure |
1 x 10-5 mmHg ( 25 ¢XC) |
|
Flash point |
249 ¢XC |
|
Specific gravity |
1.44 ( H O =1 ) |
|
Solubility |
Insoluble in water, soluble in acetone, toluene and ethyl alcohol |
¡@
¡@
¡@
¡@
¡@ | |
¡@
Primer for urethanes elastomer
This adhesive is used for bonding liquid urethanes to various substrates during the curing process. It is bonds to aluminum alloys, steel, wood, glass, etc.
¡@
|
|
|
Item |
PHT - 1147 |
|
Viscosity (CPS) |
2,000 |
|
Color |
Amber |
|
Solids content (%) |
24 |
|
Specific gravity @77 F ( 25 ¢XC ) |
0.90 |
|
Weight per lb/gal. |
7.50 |
|
Release agent for polyurethane
This release agent is generally used for polyurethane integral skin, rigid foam, etc. It features an excellent release effect, minimal cleaning stops, with either dry or glossy surface finishes.
¡@ |  |
|
Item |
PHT - 608 N |
|
Specification |
Concentrate. As a rule
dilute-able
1 : 10 -15 with e.g.
MC, 1,1,1,- T.C.E., lsohexane. |
|
Properties |
Sprayable, solvent based release agent. |
|
Packing |
25 kgs / pail |
¡@ |
|
